KNEE AIRBAG ASSEMBLY (for Driver Side) > INSTALLATION

1. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

4. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

5. INSTALL DECK FLOOR BOX RH

6. INSTALL REAR NO. 3 FLOOR BOARD

7. INSTALL REAR DECK FLOOR BOX

8. INSTALL REAR NO. 2 FLOOR BOARD

9. PERFORM DIAGNOSTIC SYSTEM CHECK

10. INSPECT SRS WARNING LIGHT