INVERTER WITH CONVERTER > REMOVAL

1. PRECAUTION

2. REMOVE SERVICE PLUG GRIP

3. REMOVE NO. 1 ENGINE UNDER COVER

4. DRAIN COOLANT (for Inverter)

5. REMOVE INVERTER COVER ASSEMBLY LH (w/ Cover)

6. REMOVE RADIATOR SUPPORT OPENING COVER

7. REMOVE NO. 1 INVERTER BRACKET

8. DISCONNECT ENGINE ROOM MAIN WIRE

9. REMOVE INVERTER COVER

10. CHECK TERMINAL VOLTAGE

11. DISCONNECT FRAME WIRE

12. DISCONNECT GENERATOR CABLE

13. DISCONNECT MOTOR CABLE

14. DISCONNECT NO. 2 ENGINE WIRE

15. INSTALL INVERTER COVER

16. DISCONNECT NO. 2 ENGINE ROOM WIRE

17. DISCONNECT WATER HOSE

18. REMOVE INVERTER WITH CONVERTER ASSEMBLY

19. REMOVE MOTOR CABLE BRACKET

20. REMOVE HIGH VOLTAGE FUSE