HV RELAY ASSEMBLY > INSTALLATION

1. INSTALL HYBRID BATTERY JUNCTION BLOCK ASSEMBLY

2. CONNECT FRAME WIRE

3. CHECK HIGH VOLTAGE CABLE CONNECTION

4. INSTALL UPPER HYBRID BATTERY COVER SUB-ASSEMBLY

5. INSTALL NO. 1 HYBRID BATTERY EXHAUST DUCT

6. INSTALL REAR FLOOR BOARD SPACER

7. INSTALL HYBRID VEHICLE BATTERY SHIELD SHEET

8. INSTALL REAR SEAT SIDE GARNISH RH

9. INSTALL REAR DOOR SCUFF PLATE RH

10. INSTALL REAR SEATBACK ASSEMBLY RH

11. INSTALL REAR NO. 1 FLOOR BOARD

12. INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY

13. INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY

14. INSTALL DECK FLOOR BOX LH (w/o Woofer)

15. INSTALL REAR NO. 4 FLOOR BOARD (w/ Woofer)

16. INSTALL REAR NO. 4 FLOOR BOARD (w/o Woofer)

17. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

18. INSTALL SERVICE PLUG GRIP