FRAME WIRE > REMOVAL

1. PRECAUTION

2. REMOVE SERVICE PLUG GRIP

3. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

4. REMOVE REAR NO. 4 FLOOR BOARD (w/o Woofer)

5. REMOVE REAR NO. 4 FLOOR BOARD (w/ Woofer)

6. REMOVE DECK FLOOR BOX LH (w/o Woofer)

7. REMOVE INVERTER WITH CONVERTER ASSEMBLY

8. REMOVE FRONT EXHAUST PIPE ASSEMBLY

9. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR

10. REMOVE FRONT FLOOR COVER RH (w/ Cover)

11. REMOVE FRONT CENTER FLOOR COVER RH (w/ Cover)

12. REMOVE FRONT SUSPENSION MEMBER BRACE REAR RH

13. REMOVE REAR SEATBACK ASSEMBLY RH

14. REMOVE REAR DOOR SCUFF PLATE RH

15. REMOVE REAR SEAT SIDE GARNISH RH

16. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY

17. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY

18. REMOVE REAR NO. 1 FLOOR BOARD

19. REMOVE HYBRID VEHICLE BATTERY SHIELD SHEET

20. REMOVE REAR FLOOR BOARD SPACER

21. REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT

22. REMOVE NO. 1 HYBRID BATTERY EXHAUST DUCT

23. REMOVE UPPER HYBRID BATTERY COVER SUB-ASSEMBLY

24. DISCONNECT CABLE FROM AUXILIARY BATTERY TERMINAL

25. DISCONNECT HYBRID BATTERY JUNCTION BLOCK ASSEMBLY

26. REMOVE INVERTER RESERVE TANK ASSEMBLY

27. REMOVE FRAME WIRE