FUEL INJECTOR > INSTALLATION

1. INSTALL FUEL INJECTOR ASSEMBLY

2. INSTALL NO. 1 DELIVERY PIPE SPACER

3. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY

4. CONNECT FUEL TUBE SUB-ASSEMBLY

5. CONNECT ENGINE WIRE

6. INSTALL EGR WITH COOLER PIPE SUB-ASSEMBLY

7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

8. INSPECT FOR FUEL LEAK

9. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

10. INSTALL DECK FLOOR BOX RH

11. INSTALL REAR NO. 3 FLOOR BOARD

12. INSTALL REAR DECK FLOOR BOX

13. INSTALL REAR NO. 2 FLOOR BOARD