FRONT AXLE HUB > INSTALLATION

1. INSTALL FRONT AXLE HUB SUB-ASSEMBLY

2. INSTALL FRONT AXLE ASSEMBLY

3. INSTALL FRONT DRIVE SHAFT ASSEMBLY

4. CONNECT FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY

5. CONNECT TIE ROD END SUB-ASSEMBLY

6. INSTALL FRONT DISC

7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY

8. TEMPORARILY INSTALL FRONT AXLE SHAFT NUT

9. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY

10. REMOVE FRONT DISC

11. INSPECT FRONT AXLE HUB BEARING LOOSENESS

12. INSPECT FRONT AXLE HUB RUNOUT

13. INSTALL FRONT DISC

14. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY

15. INSTALL FRONT FLEXIBLE HOSE

16. INSTALL FRONT SPEED SENSOR

17. INSTALL FRONT AXLE SHAFT NUT

18. INSTALL FRONT WHEEL

19. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

20. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

21. CHECK FOR SPEED SENSOR SIGNAL