FRONT DOOR BELT MOULDING > INSTALLATION

1. PRECAUTION

2. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY

3. INSTALL FRONT DOOR FRONT LOWER FRAME UPPER COVER

4. INSTALL FRONT DOOR GLASS RUN

5. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

6. INSTALL FRONT DOOR SERVICE HOLE COVER

7. INSTALL FRONT DOOR TRIM BRACKET (for Driver Side)

8. INSTALL FRONT DOOR TRIM BRACKET (for Front Passenger Side)

9. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Driver Side)

10. INSTALL DOOR ARMREST COVER (for Driver Side)

11. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

12. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (for Front Passenger Side)

13. INSTALL DOOR ASSIST GRIP ASSEMBLY (for Front Passenger Side)

14. INSTALL DOOR ASSIST GRIP COVER (for Front Passenger Side)

15. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

16. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

17. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

18. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

19. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

20. INSTALL DECK FLOOR BOX RH

21. INSTALL REAR NO. 3 FLOOR BOARD

22. INSTALL REAR DECK FLOOR BOX

23. INSTALL REAR NO. 2 FLOOR BOARD

24. INITIALIZE POWER WINDOW CONTROL SYSTEM