SHIFT LEVER > INSTALLATION

1. INSTALL TRANSMISSION INSTRUMENT PANEL SHIFT ASSEMBLY

2. INSTALL CONSOLE BOX LH (for LHD)

3. INSTALL CONSOLE BOX RH (for RHD)

4. INSTALL CONSOLE BOX INSERT

5. INSTALL REAR CONSOLE BOX ASSEMBLY

6. INSTALL CONSOLE BOX CARPET

7. INSTALL REAR CONSOLE BOX POCKET

8. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

9. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

10. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH

11. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH

12. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

14. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

15. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

16. INSTALL DECK FLOOR BOX RH

17. INSTALL REAR NO. 3 FLOOR BOARD

18. INSTALL REAR DECK FLOOR BOX

19. INSTALL REAR NO. 2 FLOOR BOARD

20. INSPECT SHIFT LEVER