PARKING BRAKE PEDAL (for RHD) > INSTALLATION

1. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY

2. CONNECT NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY

3. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY

4. INSTALL FRONT FLOOR CENTER REINFORCEMENT

5. INSTALL YAW RATE AND ACCELERATION SENSOR

6. INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET

7. INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY (w/ Audio)

8. INSTALL NO. 1 ELECTRICAL KEY OSCILLATOR

9. INSTALL MULTI-MEDIA MODULE ASSEMBLY (w/ Navigation System for DVD)

10. INSTALL NO. 1 CONSOLE BOX MOUNTING BRACKET

11. INSTALL NO. 3 CONSOLE BOX MOUNTING BRACKET

12. INSTALL CONSOLE BOX LH

13. INSTALL FRONT NO. 2 CONSOLE BOX INSERT

14. INSTALL CONSOLE BOX RH

15. INSTALL CONSOLE BOX INSERT

16. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

17. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

18. INSTALL REAR CONSOLE BOX ASSEMBLY

19. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY

20. ADJUST PARKING BRAKE PEDAL TRAVEL

21. INSPECT BRAKE WARNING LIGHT