STEERING GEAR > INSTALLATION

1. INSTALL TIE ROD END SUB-ASSEMBLY LH

2. INSTALL TIE ROD END SUB-ASSEMBLY RH

3. INSTALL STEERING LINK ASSEMBLY

4. INSTALL STEERING INTERMEDIATE SHAFT

5. INSTALL NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY

6. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

7. INSTALL FRONT SUSPENSION MEMBER REAR BRACE LH

8. INSTALL FRONT SUSPENSION MEMBER REAR BRACE RH

9. INSTALL REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY LH

10. INSTALL REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY RH

11. INSTALL FRONT ENGINE MOUNTING BRACKET LOWER REINFORCEMENT

12. CONNECT FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

13. CONNECT FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

14. CONNECT TIE ROD END SUB-ASSEMBLY LH

15. CONNECT TIE ROD END SUB-ASSEMBLY RH

16. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

17. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

18. CONNECT NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY

19. CONNECT NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY

20. INSTALL COLUMN HOLE COVER SILENCER SHEET

21. INSTALL REAR ENGINE UNDER COVER LH

22. INSTALL REAR ENGINE UNDER COVER RH

23. INSTALL FRONT NO. 3 ENGINE UNDER COVER

24. INSTALL NO. 1 ENGINE UNDER COVER

25. INSTALL FRONT WHEELS

26. STABILIZE SUSPENSION

27. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT