CYLINDER BLOCK > DISASSEMBLY

1. REMOVE NO. 1 VENTILATION CASE

2. INSPECT CONNECTING ROD THRUST CLEARANCE

3. INSPECT CONNECTING ROD OIL CLEARANCE

4. REMOVE PISTON SUB-ASSEMBLY WITH CONNECTING ROD

5. REMOVE CONNECTING ROD BEARING

6. REMOVE PISTON RING SET

7. REMOVE PISTON

8. INSPECT CRANKSHAFT THRUST CLEARANCE

9. REMOVE CRANKSHAFT

10. REMOVE UPPER CRANKSHAFT THRUST WASHER

11. REMOVE CRANKSHAFT BEARING

12. REMOVE NO. 1 OIL NOZZLE SUB-ASSEMBLY

13. CLEAN CYLINDER BLOCK

14. REMOVE STUD BOLT