AIR FUEL RATIO SENSOR > INSTALLATION

1. INSTALL AIR FUEL RATIO SENSOR

2. INSTALL NO. 2 CYLINDER HEAD COVER

3. INSPECT FOR EXHAUST GAS LEAK

4. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

5. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

6. INSTALL COWL BODY MOUNTING REINFORCEMENT LH (for LHD)

7. INSTALL COWL BODY MOUNTING REINFORCEMENT RH (for RHD)

8. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

9. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

10. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

11. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

12. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY