GLOVE BOX LIGHT > INSTALLATION

1. INSTALL GLOVE BOX LIGHT ASSEMBLY

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

3. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

5. INSTALL INSTRUMENT SIDE PANEL RH

6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

8. INSTALL FRONT DOOR SCUFF PLATE RH

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

10. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

11. INSTALL DECK FLOOR BOX RH

12. INSTALL REAR NO. 3 FLOOR BOARD

13. INSTALL REAR DECK FLOOR BOX

14. INSTALL REAR NO. 2 FLOOR BOARD

15. PERFORM DIAGNOSTIC SYSTEM CHECK

16. INSPECT SRS WARNING LIGHT