STOP LIGHT CONTROL RELAY > REMOVAL

1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

4. REMOVE INSTRUMENT SIDE PANEL

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

6. REMOVE STOP LIGHT CONTROL ECU ASSEMBLY (for LHD)

7. REMOVE STOP LIGHT CONTROL ECU ASSEMBLY (for RHD)