NAVIGATION RECEIVER > REMOVAL

1. PRECAUTION

2. REMOVE REAR NO. 2 FLOOR BOARD

3. REMOVE REAR DECK FLOOR BOX

4. REMOVE REAR NO. 3 FLOOR BOARD

5. REMOVE DECK FLOOR BOX RH

6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE

7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

8. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Metal Finish Panel and Urethane Panel)

9. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH (for Wood Panel and Bamboo Panel)

10. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

11. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH

12. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH

13. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

14. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

15. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

16. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

17. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET

18. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY ASSEMBLY WITH BRACKET

19. REMOVE HARD DISK DRIVE (w/ Navigation System for HDD)

20. REMOVE DISC PLAYER BRACKET

21. REMOVE NO. 2 DISC PLAYER BRACKET

22. REMOVE NAVIGATION COMPUTER SUB-ASSEMBLY (w/ Navigation System for HDD)

23. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY (w/ Navigation System for DVD)