POWER MANAGEMENT CONTROL ECU > REMOVAL

1. PRECAUTION

2. REMOVE REAR NO. 2 FLOOR BOARD

3. REMOVE REAR DECK FLOOR BOX

4. REMOVE REAR NO. 3 FLOOR BOARD

5. REMOVE DECK FLOOR BOX RH

6. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE

7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

8. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for LHD)

9. REMOVE FRONT DOOR SCUFF PLATE RH (for LHD)

10. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for LHD)

11. REMOVE INSTRUMENT SIDE PANEL RH (for LHD)

12. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

13. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD)

14. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

15. REMOVE ECU INTEGRATION BOX RH (for LHD)

16. REMOVE POWER MANAGEMENT CONTROL ECU (for LHD)

17. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for RHD)

18. REMOVE FRONT DOOR SCUFF PLATE LH (for RHD)

19. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for RHD)

20. REMOVE INSTRUMENT SIDE PANEL LH (for RHD)

21. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

22. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (for RHD)

23. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

24. REMOVE ECU INTEGRATION BOX LH (for RHD)

25. REMOVE POWER MANAGEMENT CONTROL ECU (for RHD)