SEAT BELT CONTROL ECU > INSTALLATION

1. INSTALL SEAT BELT CONTROL ECU (for LHD)

2. INSTALL SEAT BELT CONTROL ECU (for RHD)

3. INSTALL ECU INTEGRATION BOX RH (for LHD)

4. INSTALL ECU INTEGRATION BOX LH (for RHD)

5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

6. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

7. INSTALL INSTRUMENT SIDE PANEL

8. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP

9. INSTALL COWL SIDE TRIM SUB-ASSEMBLY

10. INSTALL FRONT DOOR SCUFF PLATE

11. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

12. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

14. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE

15. INSTALL DECK FLOOR BOX RH

16. INSTALL REAR NO. 3 FLOOR BOARD

17. INSTALL REAR DECK FLOOR BOX

18. INSTALL REAR NO. 2 FLOOR BOARD

19. INSPECT SRS WARNING LIGHT