Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL

AIR CONDITIONING PANEL > REMOVAL

for Preparation Click here



1. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

  1. Open the glove compartment door.



    B271366

  1. Using a moulding remover, disengage the 7 claws and 4 guides, and remove the lower center instrument panel finish panel as shown in the illustration.



2. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    E220731

  1. Disengage the 7 claws and remove the air conditioning control assembly as shown in the illustration.

  1. Disconnect the connector.



3. REMOVE LOWER HEATER CONTROL BASE


    E220733

  1. Remove the 8 screws and remove the lower heater control base.



4. REMOVE CENTER CLUSTER MODULE CIRCUIT

NOTICE:
When disassembling the center cluster module circuit, eliminate static electricity by touching the vehicle body to prevent electrical components from being damaged.



    E220736

  1. Disengage the 2 guides and remove the center cluster module circuit.