Vehicle Interior
DOOR LOCK
POWER DOOR LOCK CONTROL SYSTEM
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- OPERATION CHECK
- CUSTOMIZE PARAMETERS
- INITIALIZATION
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DIAGNOSIS SYSTEM
- DTC CHECK / CLEAR
- DATA LIST / ACTIVE TEST
- DIAGNOSTIC TROUBLE CODE CHART
- B1243 A malfunction occurs in the GSW input circuit of the main body ECU (multiplex network body ECU).
- All Doors LOCK/UNLOCK Functions do not Operate Via Master Switch, Driver Side Door Key Cylinder
- All Doors LOCK/UNLOCK Functions do not Operate Via Door Control Switch
- Only Back Door cannot be Opened
WIRELESS DOOR LOCK CONTROL SYSTEM
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- OPERATION CHECK
- CUSTOMIZE PARAMETERS
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DIAGNOSIS SYSTEM
- DTC CHECK / CLEAR
- DATA LIST / ACTIVE TEST
- DIAGNOSTIC TROUBLE CODE CHART
- B1242 Short in RDA or RSSI to ground between the certification ECU (smart key ECU assembly) and the door control...
- Only Wireless Control Function is Inoperative
- No Answer-Back
TRANSMITTER BATTERY
DOOR CONTROL TRANSMITTER
DOOR CONTROL SWITCH
FRONT DOOR LOCK
REAR DOOR LOCK
BACK DOOR LOCK
DOOR CONTROL RECEIVER
WIRELESS DOOR LOCK BUZZER
DOOR CONTROL RELAY
THEFT DETERRENT / KEYLESS ENTRY
ENTRY AND START SYSTEM (for Entry Function)
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- OPERATION CHECK
- CUSTOMIZE PARAMETERS
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DTC CHECK / CLEAR
- DATA LIST / ACTIVE TEST
- DIAGNOSTIC TROUBLE CODE CHART
- B27A1 An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and front...
- B27A6 An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and No. 2...
- B27A2 An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and front...
- B27A7 An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and No. 3...
- B27A5 An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and No. 1...
- B27A8 An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and...
- Entry Answer-back Buzzer does not Sound
- All Door Entry Lock/Unlock Functions and Wireless Functions do not Operate
- All Door Entry Lock/Unlock Functions do not Operate, but Wireless Functions Operate
- Driver Side Door Entry Unlock Function does not Operate
- Front Passenger Side Door Entry Unlock Function does not Operate
- Driver Side Door Entry Lock and Unlock Functions do not Operate
- Front Passenger Side Door Entry Lock and Unlock Functions do not Operate
- Driver Side Door Entry Lock Function does not Operate
- Front Passenger Side Door Entry Lock Function does not Operate
- Room Oscillator does not Recognize Key
- Entry Interior Alarm does not Sound
- Back Door Entry Unlock Function does not Operate
- Back Door Entry Lock and Unlock Functions do not Operate
- Back Door Entry Lock Function does not Operate
ENTRY AND START SYSTEM (for Start Function)
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- OPERATION CHECK
- CUSTOMIZE PARAMETERS
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DIAGNOSIS SYSTEM
- DTC CHECK / CLEAR
- DATA LIST / ACTIVE TEST
- DIAGNOSTIC TROUBLE CODE CHART
- B2271 Either condition is met (1-trip detection logic*):The IG1 or IG2 drive circuit in the power management...
- B2282 Mismatch between the vehicle speed signal from the direct line sent by the combination meter and the vehicle...
- B2274 Malfunction in the ACC relay activation circuit in the power management control ECU or the external circuit...
- B2284 Stop light switch assembly operation information received by the power management control ECU from the stop...
- B2275 Power management control ECU internal HV activation request output circuit malfunction or external circuit...
- B2286 READY signal error inside the power management control ECU.
- B2277 The water submersion detection circuit in the power management control ECU detects water submersion (1-trip...
- U0293 CAN communication signal error inside the power management control ECU (power control section - HV control...
- Power Source Mode does not Change to ON (IG and ACC)
- Power Source Mode does not Change to ON (IG)
- Power Source Mode does not Change to ON (ACC)
- Power Source Mode does not Change to ON (READY)
PUSH-BUTTON START SYSTEM
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- OPERATION CHECK
- CUSTOMIZE PARAMETERS
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DIAGNOSIS SYSTEM
- DTC CHECK / CLEAR
- DATA LIST / ACTIVE TEST
- DIAGNOSTIC TROUBLE CODE CHART
- B2271 Either condition is met (1-trip detection logic*):The IG1 or IG2 drive circuit in the power management...
- B2286 READY signal error inside the power management control ECU.
- B2274 Malfunction in the ACC relay activation circuit in the power management control ECU or the external circuit...
- B27A5 An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and No. 1...
- B2275 Power management control ECU internal HV activation request output circuit malfunction or external circuit...
- B27A6 An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and No. 2...
- B2277 The water submersion detection circuit in the power management control ECU detects water submersion (1-trip...
- B27A7 An open circuit is detected in the circuit between the certification ECU (smart key ECU assembly) and No. 3...
- B2282 Mismatch between the vehicle speed signal from the direct line sent by the combination meter and the vehicle...
- U0293 CAN communication signal error inside the power management control ECU (power control section - HV control...
- B2284 Stop light switch assembly operation information received by the power management control ECU from the stop...
- Power Source Mode does not Change to ON (IG and ACC)
- Power Source Mode does not Change to ON (IG)
- Power Source Mode does not Change to ON (ACC)
- Power Source Mode does not Change to ON (READY)
- Room Oscillator does not Recognize Key
- Warning Buzzer does not Sound
ENGINE IMMOBILISER SYSTEM
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DTC CHECK / CLEAR
- DATA LIST / ACTIVE TEST
- DIAGNOSTIC TROUBLE CODE CHART
- B2779 One of the following conditions is met (1 trip detection logic*):A remote start communication error...
- B2799 Either condition is met (1 trip detection logic*):A malfunction in the communication or communication lines...
- B2784 The transponder key amplifier coil built into the power switch is open (see below) or shorted (determined by...
- B279A The communication line (IMI - EFIO) between the power management control ECU and ID code box (immobiliser...
- B278A A short to GND in the power supply of the transponder key amplifier of the power switch (VC5 - VC5) (1 trip...
- B279C A power management control ECU that is incompatible with the engine immobiliser system is installed (1 trip...
- B2790 An internal malfunction occurs in the ID code box (immobiliser code ECU) (EEPROM access malfunction) (1 trip...
- Security Indicator Light Does not Blink
THEFT DETERRENT SYSTEM
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- CUSTOMIZE PARAMETERS
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DIAGNOSIS SYSTEM
- DTC CHECK / CLEAR
- DATA LIST / ACTIVE TEST
- DIAGNOSTIC TROUBLE CODE CHART
- B2761 Intrusion sensor outputs signal for sensor malfunction
- B2768 If one of the following is detected:Yaw rate and acceleration sensor power supply malfunctionYaw rate and...
- B2762 After normal/trouble signal is output from intrusion sensor as result of self-diagnosis, following...
- B2769 After normal/trouble signal is output from yaw rate and acceleration sensor as result of self-diagnosis, the...
- B2764 After normal/trouble signal is output from intrusion sensor as result of self-diagnosis, following...
- B276A Terminal CSIF of yaw rate and acceleration sensor has not received signal for 5 seconds or more
- Engine Hood Courtesy Switch Circuit
- Horn Circuit
- Intrusion Sensor Cancel Switch Circuit
- Theft Warning Siren Circuit
- Glass Breakage Sensor Circuit
- ECU Power Source Circuit
INTRUSION SENSOR
ELECTRICAL KEY OSCILLATOR (for Front Floor)
ELECTRICAL KEY OSCILLATOR (for Center Floor)
ELECTRICAL KEY OSCILLATOR (for Rear Floor)
ELECTRICAL KEY OSCILLATOR (for Rear Side)
ENGINE HOOD COURTESY SWITCH
SECURITY HORN ASSEMBLY
LIGHTING (INT)
LIGHTING SYSTEM
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- OPERATION CHECK
- CUSTOMIZE PARAMETERS
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DIAGNOSIS SYSTEM
- DATA LIST / ACTIVE TEST
- IG Signal Circuit
- ACC Signal Circuit
- Door Courtesy Switch Circuit
- Interior Light Circuit
- Footwell Light Circuit
- Overhead Console Illumination Light Circuit
- Power Switch Illumination Circuit
- Door Unlock Detection Switch Circuit
VANITY LIGHT
PERSONAL LIGHT
ROOM LIGHT
LUGGAGE COMPARTMENT ROOM LIGHT
GLOVE BOX LIGHT
FOOTWELL LIGHT
FRONT DOOR COURTESY SWITCH
REAR DOOR COURTESY SWITCH
BACK DOOR COURTESY SWITCH
METER / GAUGE / DISPLAY
METER / GAUGE SYSTEM
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- CUSTOMIZE PARAMETERS
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DIAGNOSIS SYSTEM
- DTC CHECK / CLEAR
- FREEZE FRAME DATA
- FAIL-SAFE CHART
- DATA LIST / ACTIVE TEST
- DIAGNOSTIC TROUBLE CODE CHART
- B1500 When IG voltage is 9.5 V or more and the following condition is detected:Fuel sender gauge operation...
- U0131 When IG voltage is 9.5 V or more and the following condition is detected:No communication with power steering...
- B1503 When IG voltage is 9.5 V or more and the following condition is detected:Engine coolant temperature sensor...
- U0142 When IG voltage is 9.5 V or more and the following condition is detected:No communication with main body ECU...
- U0100 When IG voltage is 9.5 V or more and the following condition is detected:No communication with ECM continues...
- U0151 When IG voltage is 9.5 V or more and the following condition is detected:No communication with airbag ECU...
- U0129 When IG voltage is 9.5 V or more and the following condition is detected:No communication with skid control...
- ON-VEHICLE INSPECTION
- Entire Combination Meter does not Operate
- Speedometer Malfunction
- Tachometer Malfunction
- Fuel Receiver Gauge Malfunction
- Malfunction in Water Temperature Warning Light
- Hybrid System Indicator Malfunction
- Operating Light Control Rheostat does not Change Light Brightness
- Meter Illumination is Always Dark
- Meter Illumination does not Dim at Night
- Speed Signal Circuit
CLOCK SYSTEM
COMBINATION METER
LIGHT CONTROL RHEOSTAT
MIRROR (INT)
INNER REAR VIEW MIRROR
SUPPLEMENTAL RESTRAINT SYSTEMS
AIRBAG SYSTEM
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DIAGNOSIS SYSTEM
- DTC CHECK / CLEAR
- CHECK MODE PROCEDURE
- DATA LIST / ACTIVE TEST
- DIAGNOSTIC TROUBLE CODE CHART
- B1000/31
- B1813/53
- B1610/13
- B1815/54
- B1612/83
- B1816/54
- B1613/83
- B1817/54
- B1615/14
- B1818/54
- B1617/84
- B1820/55
- B1618/84
- B1821/55
- B161A/8A
- B1822/55
- B1620/21
- B1823/55
- B1622/81
- B1825/56
- B1623/81
- B1826/56
- B1632/81
- B1827/56
- B1633/81
- B1828/56
- B1642/81
- B1830/57
- B1625/22
- B1831/57
- B1627/82
- B1832/57
- B1628/82
- B1833/57
- B1637/82
- B1835/58
- B1638/82
- B1836/58
- B1647/82
- B1837/58
- B1630/23
- B1838/58
- B1635/24
- B1860/64
- B1651/33
- B1861/64
- B1653/35
- B1862/64
- B1655/37
- B1863/64
- B1656/38
- B1865/65
- B1660/43
- B1866/65
- B1800/51
- B1867/65
- B1801/51
- B1868/65
- B1802/51
- B1900/73
- B1803/51
- B1901/73
- B1805/52
- B1902/73
- B1806/52
- B1903/73
- B1807/52
- B1905/74
- B1808/52
- B1906/74
- B1810/53
- B1907/74
- B1811/53
- B1908/74
- B1812/53
- SRS Warning Light Remains ON
- SRS Warning Light does not Come ON
- Trouble in Passenger Airbag ON/OFF Indicator
- TC and CG Terminal Circuit
STEERING PAD
SPIRAL CABLE
KNEE AIRBAG ASSEMBLY (for Driver Side)
KNEE AIRBAG ASSEMBLY (for Front Passenger Side)
FRONT PASSENGER AIRBAG ASSEMBLY
CURTAIN SHIELD AIRBAG ASSEMBLY
FRONT SEAT SIDE AIRBAG ASSEMBLY
CENTER AIRBAG SENSOR ASSEMBLY
FRONT AIRBAG SENSOR
SIDE AIRBAG SENSOR
REAR AIRBAG SENSOR
SEAT POSITION SENSOR
AIRBAG CUT-OFF SWITCH
PRE-CRASH SAFETY
PRE-CRASH SAFETY SYSTEM
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DIAGNOSIS SYSTEM
- DTC CHECK / CLEAR
- FAIL-SAFE CHART
- DATA LIST / ACTIVE TEST
- DIAGNOSTIC TROUBLE CODE CHART
- B2000 Short to B+ in the seat belt motor RH circuit continues for 1 second or more.
- B2075 Open or short in front seat inner belt (buckle switch) circuit
- B2001 Short to ground in the seat belt motor RH circuit continues for 1 second or more.
- B2085 The brake booster with master cylinder (skid control ECU) detects an interruption in CAN communication...
- B2002 Open in the seat belt motor RH circuit continues for 1 second or more.
- B2090 While initial check is running, the power switch is on (IG) and the pre-crash system is operating, a...
- B2005 Short to B+ in the seat belt motor LH circuit continues for 1 second or more.
- C1A01 When the power switch is on (IG), the driving support ECU detects an internal malfunction for approx. 1...
- B2006 Short to ground in the seat belt motor LH circuit continues for 1 second or more.
- C1A02 Inconsistent vehicle specification information between the main body ECU and driving support ECU continues...
- B2007 Open in the seat belt motor LH circuit continues for 1 second or more.
- C1A0A When the power switch is on (IG), the country specification information from the driving support ECU and...
- B2015 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- C1A10 When the power switch is on (IG), the driving support ECU receives information that there is a malfunction in...
- B2016 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- C1A11 When the power switch is on (IG), misalignment of the millimeter wave radar sensor is detected for approx. 1...
- B2020 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- C1A14 When the power switch is on (IG), misalignment of the millimeter wave radar sensor is detected for approx. 1...
- B2021 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- C1A40 While the power switch is on (IG), a hybrid control system or engine control system malfunction signal is...
- B2025 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- C1A41 While the power switch is on (IG), a brake request signal from the hybrid vehicle control ECU and driving...
- B2026 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- C1A46 When the vehicle speed is 5 km/h (4 mph) or more, a yaw rate sensor malfunction signal is received from the...
- B2027 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- C1A47 When the vehicle speed is 50 km/h (32 mph) or more, a steering angle sensor malfunction signal is received...
- B2030 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- C1A4A When the power switch is on (IG), a skid control buzzer circuit malfunction signal is received from the brake...
- B2031 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- C1A4B When the power switch is on (IG), a stop light relay malfunction signal is received from the brake booster...
- B2032 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- U0122 When the power switch is on (IG), a communication error between the brake booster with master cylinder (skid...
- B2035 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- U0123 When the power switch is on (IG), a communication error between the yaw rate sensor and the driving support...
- B2040 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- U0126 When the power switch is on (IG), a communication error between the steering angle sensor and the driving...
- B2041 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- U0140 When the power switch is on (IG), communication stop between the main body ECU and seat belt control ECU...
- B2043 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- U0151 When the power switch is on (IG), communication stop between the center airbag sensor and seat belt control...
- B2047 While initial check is running and the power switch is on (IG), the seat belt control ECU detects an internal...
- U0293 When the power switch is on (IG), a communication error between the power management control ECU and brake...
- B2036 Malfunction in seat belt control ECUPower source voltage (+B) is not input to the seat belt control ECU.
- U1100 When the power switch is on (IG), a communication error between the seat belt control ECU and the driving...
- B2060 Malfunction in the brake control system (vehicle stability control system) is detected.
- U1104 When the power switch is on (IG), a communication error between the driving support ECU and the millimeter...
- B2064 Communication with the main body ECU is normal and received steering wheel position information is not set...
- U0235 When the power switch is on (IG), a communication error from the millimeter wave radar sensor to the driving...
- B2074 Malfunction signal is received from center airbag sensor
- Pre-crash Safety Brake Cancel Switch Circuit
- Power Source Circuit
PRE-CRASH BRAKE CANCEL SWITCH
SEAT BELT CONTROL ECU
SEAT
FRONT POWER SEAT CONTROL SYSTEM (w/ Memory)
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- OPERATION CHECK
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DIAGNOSIS SYSTEM
- DTC CHECK / CLEAR
- DATA LIST / ACTIVE TEST
- DIAGNOSTIC TROUBLE CODE CHART
- B2650 The forward and backward lock detection position of the sensor is the same.
- B2653 The upward and downward lock detection position of the sensor is the same.
- B2651 The forward and backward lock detection position of the sensor is the same.
- B2658 A problem with the voltage supplied to the position control sensor.
- B2652 The upward and downward lock detection position of the sensor the same.
- Front Power Seat does not Operate with Front Power Seat Switch
- One or more Power Seat Motors do not Operate
- Power Seat Position is not Memorized
- Power Seat does not Return to Memorized Position
- Wireless Transmitter Memory Function does not Operate
- Wireless-linked Return Function does not Operate
SEAT HEATER SYSTEM
FRONT SEAT ASSEMBLY (for Manual Seat)
FRONT SEAT ASSEMBLY (for Power Seat)
REAR SEAT ASSEMBLY
SEAT MEMORY SWITCH
POWER SEAT SWITCH
LUMBAR SWITCH
FRONT SEATBACK HEATER (for Manual Seat)
FRONT SEATBACK HEATER (for Power Seat)
FRONT SEAT CUSHION HEATER (for Manual Seat)
FRONT SEAT CUSHION HEATER (for Power Seat)
SEAT BELT
SEAT BELT TENSION REDUCER SYSTEM
SEAT BELT WARNING SYSTEM
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- CUSTOMIZE PARAMETERS
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DIAGNOSIS SYSTEM
- DATA LIST / ACTIVE TEST
- ON-VEHICLE INSPECTION
- Driver Side Seat Belt Warning Light does not Operate
- Front Passenger Side Seat Belt Warning Light Malfunction
- Rear Seat Belt Warning Light Malfunction
OCCUPANT DETECTION SENSOR
FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat)
FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)
FRONT SEAT OUTER BELT ASSEMBLY
REAR SEAT INNER BELT ASSEMBLY
REAR SEAT OUTER BELT ASSEMBLY
REAR CENTER SEAT OUTER BELT ASSEMBLY
TONGUE PLATE STOPPER
CHILD RESTRAINT SEAT ANCHOR BRACKET
HEATING / AIR CONDITIONING
AIR CONDITIONING SYSTEM
- PRECAUTION
- PARTS LOCATION
- SYSTEM DIAGRAM
- SYSTEM DESCRIPTION
- HOW TO PROCEED WITH TROUBLESHOOTING
- CUSTOMIZE PARAMETERS
- INITIALIZATION
- PROBLEM SYMPTOMS TABLE
- TERMINALS OF ECU
- DIAGNOSIS SYSTEM
- DTC CHECK / CLEAR
- DATA LIST / ACTIVE TEST
- DIAGNOSTIC TROUBLE CODE CHART
- B1411/11
- B1477/77
- B1412/12
- B1497/97
- B1413/13
- B1498/98
- B1423/23
- B14A2 Short in driver side solar sensor circuit
- B1441/41
- B14A3 Short in passenger side solar sensor circuit
- B1442/42
- B14A8 Open or short in glass temperature sensor circuit
- B1443/43
- B14A9 Open or short in glass surroundings temperature sensor circuit
- B1446/46
- B14AA Open or short in glass humidity sensor circuit
- B1471/71
- P0AA6-611
- B1472/72
- U0100 No communication with ECM
- B1473/73
- U0131 No communication with electric power steering ECU
- B1474/74
- U0142 No communication with main body ECU
- B1475/75
- U0155 No communication with combination meter assembly
- B1476/76
- U0293 No communication with HV ECU
- Air Conditioning Control Panel Circuit
- Blower Motor Circuit
- PTC Heater Circuit
- ECO Switch Circuit
- IG Power Source Circuit
- Back-up Power Source Circuit