Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH BRAKE CANCEL SWITCH

PRE-CRASH BRAKE CANCEL SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL PRE-CRASH BRAKE CANCEL SWITCH ASSEMBLY (for LHD)


    B269175

  1. Engage the 2 claws to install the pre-crash brake cancel switch assembly.



2. INSTALL PRE-CRASH BRAKE CANCEL SWITCH ASSEMBLY (for RHD)


    B269176

  1. Engage the 2 claws to install the pre-crash brake cancel switch assembly.



3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

  1. Connect each connector.

  1. Engage the clamp.

  1. Engage the clip.

  1. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <E>.



4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

  1. Connect each connector.

  1. Engage the clamp.

  1. Engage the 2 clips.

  1. Install the No. 1 instrument panel under cover sub-assembly with the screw <E>.