Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH BRAKE CANCEL SWITCH

PRE-CRASH BRAKE CANCEL SWITCH > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    B269941

  1. Remove the 2 screws <E>.

  1. Disengage the clip.

  1. Disengage the clamp.

  1. Disconnect each connector and remove the No. 1 instrument panel under cover sub-assembly.



2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    B269942

  1. Remove the screw <E>.

  1. Disengage the 2 clips.

  1. Disengage the clamp.

  1. Disconnect each connector and remove the No. 1 instrument panel under cover sub-assembly.



3. REMOVE PRE-CRASH BRAKE CANCEL SWITCH ASSEMBLY (for LHD)


    B266766

  1. Disengage the 2 claws and remove the pre-crash brake cancel switch assembly.



4. REMOVE PRE-CRASH BRAKE CANCEL SWITCH ASSEMBLY (for RHD)


    B266768

  1. Disengage the 2 claws and remove the pre-crash brake cancel switch assembly.