Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX

FRONT CONSOLE BOX > REMOVAL

for Preparation Click here



1. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

  1. Open the glove compartment door.



    B271366

  1. Using a moulding remover, disengage the 7 claws and 4 guides, and remove the lower center instrument panel finish panel as shown in the illustration.



2. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH


    B269919

  1. Disengage the 5 claws, clip and 2 guides, and remove the upper No. 2 console panel garnish.



3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH


    B269921

  1. Disengage the 4 claws, clip and 3 guides, and remove the upper No. 1 console panel garnish.



4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

  1. Open the console compartment door.



    B269923

  1. Using a moulding remover, disengage the 12 claws.

  1. Disengage the clamp.

  1. Disconnect each connector and remove the upper console panel sub-assembly.



5. REMOVE REAR CONSOLE BOX POCKET


    B269933

  1. Remove the rear console box pocket.



6. REMOVE CONSOLE BOX CARPET


    B269935

  1. Remove the console box carpet.



7. REMOVE REAR CONSOLE BOX ASSEMBLY


    B269938

  1. Remove the 2 screws and 4 bolts.



    B269940

  1. Disengage the 8 guides and remove the rear console box assembly.