Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX

FRONT CONSOLE BOX > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR CONSOLE END PANEL


    B269981

  1. Disengage the 14 claws and remove the rear console end panel.



2. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY


    B269983

  1. Remove the 4 screws.

  1. Disengage the 4 guides and remove the console compartment door sub-assembly.



3. REMOVE GLOVE COMPARTMENT DOOR CHECK CUSHION


    B269985E01

  1. Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the 2 glove compartment door check cushions.
    Text in Illustration 
    *1
    		Protective Tape



4. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY


    B269987

  1. Remove the 2 screws.

  1. Using a moulding remover, disengage the 12 claws and 2 guides, and remove the console compartment door lock sub-assembly and inner console compartment door.



    B269989

  1. Disengage the 2 guides and remove the console compartment door lock sub-assembly from the inner console compartment door.



5. REMOVE UPPER CONSOLE DOOR SUB-ASSEMBLY


    B269990

  1. Remove the 4 screws.

  1. Disengage the 3 guides and remove the upper console door sub-assembly from the console compartment door hinge sub-assembly.