Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM

AIR CONDITIONING SYSTEM > INITIALIZATION

for Preparation Click here



INITIALIZE SERVO MOTOR

  1. Turn the power switch off.

  2. Connect the intelligent tester to the DLC3.

  3. Turn the power switch on (IG).

  4. Press the A/C OFF switch.

  5. Turn the intelligent tester on.

  6. Enter the following menus: Body / Air Conditioner / Utility / Servomotor Initialization.

  7. According to the intelligent tester display, select the "Next" switch.

  8. According to the intelligent tester display, select the "Next" switch.

    HINT:
    During the initialization, A/C AUTO indicator light comes on, and goes off when the initialization has finished.

  9. According to the intelligent tester display, select the "Exit" switch to finish the initialization.