Home › Vehicle Interior › SEAT › LUMBAR SWITCH

LUMBAR SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL LUMBAR SWITCH

  1. Engage the 4 claws to install the lumbar switch.



2. INSTALL FRONT SEAT CUSHION SHIELD


  1. w/o Seat Position Memory System:



      B269629E01

    1. Connect the connector.
      Text in Illustration 
      *A
      		w/ Seat Position Memory System:
      *1
      		Wire Harness Cover

  1. w/ Seat Position Memory System:

    1. Connect the 2 connectors.

  1. Engage the 2 clamps.

  1. Install the wire harness to the wire harness cover.

  1. Engage the 2 claws to close the wire harness cover.



    B269627E01

  1. Engage the clip and guide (1).

  1. Engage the guide (2) and 8 claws to install the front seat cushion shield.



    B269625

  1. Connect the rubber band.



3. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD


    B269623

  1. Install the clip.



    B269621

  1. Engage the 2 guides and claw as shown in the illustration.



    B269617

  1. Engage the guide as shown in the illustration.

  1. Install the front inner No. 1 seat cushion shield with the screw.



4. INSTALL FRONT SEAT ASSEMBLY
(Click here)