Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › QUARTER WINDOW MOULDING

QUARTER WINDOW MOULDING > INSTALLATION

for Preparation Click here



1. INSTALL QUARTER WINDOW UPPER MOULDING

HINT:
When installing a new quarter window upper moulding, heat the vehicle body using a heat light.

Heating Temperature 
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)

NOTICE:
Do not heat the vehicle body or moulding excessively.

  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install the quarter window upper moulding.

    1. Using a heat light, heat the vehicle body and quarter window upper moulding.

    2. Remove the release paper from the quarter window upper moulding.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Engage the 2 clips and install a new quarter window upper moulding.



2. INSTALL QUARTER WINDOW ASSEMBLY
(Click here)