Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM

WIRELESS DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the intelligent tester.

    1. Connect the intelligent tester.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Utility / Customize / Wireless Door Lock.

    5. Select the setting by referring to the table below.

      Display
      		Default
      		Content
      		Setting
      		Relevant ECU
      Wireless Control
      		ON
      		Function that turns wireless door lock/ON or OFF
      		ON or OFF
      		Main body ECU (Multiplex network body ECU)
      Hazard Answer Back
      		ON
      		When the doors are locked by wireless operation, the hazard warning lights flash once.
      When the doors are unlocked by wireless operation, the hazard warning lights flash twice.
      		ON or OFF
      		Main body ECU (Multiplex network body ECU)
      Open Door Warning
      		ON
      		The buzzer sounds when lock is pressed when any of the doors are ajar.
      		ON or OFF
      		Main body ECU (Multiplex network body ECU)
      Unlock 2 Operation
      		ON*1
      OFF*2
      		Function that unlocks driver door when unlock switch on electrical key transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.
      		ON or OFF
      		Main body ECU (Multiplex network body ECU)
      Panic Function*3
      		ON
      		Function to operate theft deterrent system by continuously pressing panic switch on electrical key transmitter for 0.8 seconds
      		ON or OFF
      		Main body ECU (Multiplex network body ECU)
      Auto Lock Time
      		30 s
      		Function that regulates the interval between unlocking and automatic relocking of doors
      		30 s, 60 s or 120 s
      		Main body ECU (Multiplex network body ECU)
      Wireless Buzzer Resp*3
      		ON
      		Wireless door lock buzzer response/ON or OFF
      		ON or OFF
      		Main body ECU (Multiplex network body ECU)
      P/W Ope buzzer
      		ON
      		Wireless power window buzzer response/ON or OFF
      		ON or OFF
      		Main body ECU (Multiplex network body ECU)
      Wireless Buzzer Vol
      		Level7
      		Wireless door lock buzzer volume
      		Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0
      		Main body ECU (Multiplex network body ECU)
      *1: for G.C.C. countries, Australia and New Zealand
      *2: except G.C.C. countries, Australia and New Zealand
      *3: except Europe

  1. Customizing with the combination meter assembly

    HINT:
    1. Press and hold DISP switch (steering pad switch assembly) when entering an item.
    2. Briefly press DISP switch (steering pad switch assembly) when selecting an item.


    1. Turn the power switch on (IG).

    2. Enter the following menus: Settings / Vehicle Settings.

    3. Select the setting by referring to the table below.

      Display
      		Default
      		Content
      		Setting
      		Relevant ECU
      REMOTE 2-PRESS UNLOCK
      		ON*1
      OFF*2
      		Function that unlocks the driver door when the unlock switch on the electrical key transmitter is pressed once, and unlocks all doors when pressed twice. If the setting is OFF, pressing the unlock switch once makes all doors unlock.
      		ON or OFF
      		Main body ECU (Multiplex network body ECU)
      AUTO. RELOCK TIME ADJUSTMENT
      		30 s
      		Function that regulates the interval between unlocking and automatic relocking of doors.
      		30 s, 60 s or 120 s
      		Main body ECU (Multiplex network body ECU)
      LOCK/UNLOCK ANSWER BACK
      		ON
      		When the doors are locked by wireless operation, the hazard warning lights flash once.
      When the doors are unlocked by wireless operation, the hazard warning lights flash twice.
      		ON or OFF
      		Main body ECU (Multiplex network body ECU)
      LOCK FEEDBACK VOLUME
      		7
      		Wireless door lock buzzer volume
      		0, 1, 2, 3, 4, 5, 6 or 7
      		Main body ECU (Multiplex network body ECU)
      *1: for G.C.C. countries, Australia and New Zealand
      *2: except G.C.C. countries, Australia and New Zealand

    4. Press and hold DISP switch (steering pad switch assembly).

    5. The setting completion screen will be displayed.

    6. Return to the item selection screen.