AIR CONDITIONING SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here

HINT:

The following items can be customized.

NOTICE:

1. When the customer requests a change in a function, first make sure that the function can be customized.
   
2. Be sure to make a note of the current settings before customizing.
   
3. When troubleshooting a function, first make sure that the function is set to the default setting.
   

1. Customizing with the intelligent tester
   
   

   1. Connect the intelligent tester to the DLC3.
      

   2. Turn the power switch on (IG).
      

   3. Turn the intelligent tester on.
      

   4. Enter the following menus: Body / Air Conditioner / Utility / Customize.
      

   5. Select the setting by referring to the table below.
      
      

      Display	Default	Content	Setting	Relevant ECU
      Set Temperature Shift	Normal	Function to control with the shifted temperature against the displayed temperature	+2 C, +1 C, Normal, -1 C or -2 C	Air conditioning amplifier assembly
      Compressor Mode	Automatic	Function to automatically turn the A/C on by pressing the AUTO button when blower is on and the A/C is off	Manual or Automatic	Air conditioning amplifier assembly
      Air Inlet Mode	Automatic	Function to shift from INLET mode to RECIRCULATION mode when the A/C is turned on	Manual or Automatic	Air conditioning amplifier assembly
      Foot/DEF Auto Mode	ON	Function to automatically turn the airflow from FOOT/DEF on when AUTO mode is on	OFF or ON	Air conditioning amplifier assembly
      Foot/DEF Automatic Blow Up Function	ON	Function to automatically increase the blower level when the defroster is on	OFF or ON	Air conditioning amplifier assembly
      Ambient Temperature Shift	Normal	Function to control the shifted ambient temperature in relation to the displayed ambient temperature	+3 C, +2 C, +1 C, Normal, -1 C, -2 C or -3 C	Air conditioning amplifier assembly
      ECO MODE Cancel	OFF	Function to cancel the ECO mode drive when item is on	OFF or ON	Air conditioning amplifier assembly
      Noise and Vibration Reduction	OFF	Function to change speed of the compressor when item is on	OFF or ON	Air conditioning amplifier assembly

2. Customizing with the combination meter assembly
   

   HINT:

   1. Press and hold DISP switch (steering pad switch assembly) when entering an item.
      
   2. Briefly press DISP switch (steering pad switch assembly) when selecting an item.
      
   
   

   1. Turn the power switch on (IG).
      

   2. Enter the following menus: Settings / Vehicle Settings.
      

   3. Select the setting by referring to the table below.
      
      

      Display	Default	Content	Setting	Relevant ECU
      Auto A/C Mode	Automatic	Function to shift from INLET mode to RECIRCULATION mode when the A/C is turned on	Manual or Automatic	Air conditioning amplifier assembly

   4. Press and hold DISP switch (steering pad switch assembly).
      

   5. The setting completion screen will be displayed.
      

   6. Return to the item selection screen.