Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM

DTC    P0BCE-313    Generator Inverter Temperature Sensor Circuit Low

DTC    P0BCF-312    Generator Inverter Temperature Sensor Circuit High

for Preparation Click here


DESCRIPTION

  1. The MG ECU located in the inverter with converter assembly detects the temperature of the generator inverter using the temperature sensor built into the inverter with converter assembly. The inverter cooling system operates independently of the engine cooling system. The MG ECU uses signals from the generator inverter temperature sensor to check the effectiveness of the inverter cooling system. If necessary, the MG ECU will limit inverter output to help prevent inverter overheating. The ECU also detects malfunctions in the generator inverter temperature sensor and its wiring.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P0BCE
313
Open or short to GND in the generator inverter temperature sensor signal circuit
Inverter with converter assembly
P0BCF
312
Short to +B in the generator inverter temperature sensor signal circuit

INSPECTION PROCEDURE

1.REPLACE INVERTER WITH CONVERTER ASSEMBLY

  1. Replace the inverter with converter assembly (Click here).


NEXT

COMPLETED