FUEL INJECTOR > INSTALLATION

1. INSTALL INJECTOR

2. INSTALL FUEL DELIVERY PIPE

3. CONNECT FUEL MAIN TUBE

4. INSTALL INTAKE AIR SURGE TANK

5. CONNECT VENTILATION HOSE

6. CONNECT UNION TO CHECK VALVE HOSE

7. CONNECT WATER BY-PASS HOSE

8. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

9. CONNECT NO. 2 VENTILATION HOSE

10. ADD ENGINE COOLANT

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

12. CHECK FOR COOLANT LEAKAGE

13. CHECK FOR FUEL LEAKAGE

14. CHECK FOR ENGINE OIL LEAKAGE

15. INSTALL V-BANK COVER

16. INSTALL ENGINE ROOM SIDE COVER RH

17. INSTALL COOL AIR INTAKE DUCT SEAL

18. INSTALL ENGINE UNDER COVER

19. PERFORM INITIALIZATION

20. WARM UP ENGINE