FUEL PRESSURE PULSATION DAMPER > INSTALLATION

1. INSTALL FUEL PRESSURE PULSATION DAMPER

2. INSTALL INTAKE AIR SURGE TANK

3. CONNECT VENTILATION HOSE

4. CONNECT UNION TO CHECK VALVE HOSE

5. CONNECT WATER BY-PASS HOSE

6. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

7. CONNECT NO. 2 VENTILATION HOSE

8. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL

9. ADD ENGINE COOLANT

10. CHECK FOR COOLANT LEAKAGE

11. CHECK FOR FUEL LEAKAGE

12. CHECK FOR ENGINE OIL LEAKAGE

13. INSTALL V-BANK COVER

14. INSTALL ENGINE ROOM SIDE COVER RH

15. INSTALL COOL AIR INTAKE DUCT SEAL

16. INSTALL ENGINE UNDER COVER

17. PERFORM INITIALIZATION

18. WARM UP ENGINE