FUEL TANK > INSTALLATION

1. INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY

2. INSTALL FUEL TANK CUSHION

3. INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY

4. INSTALL FUEL TANK SUB-ASSEMBLY

5. CONNECT EMISSION HOSE

6. CONNECT FUEL TANK TO FILLER PIPE HOSE

7. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

8. CONNECT PARKING BRAKE CABLE ASSEMBLY

9. INSTALL REAR FLOOR SIDE MEMBER COVER LH

10. INSTALL REAR FLOOR SIDE MEMBER COVER RH

11. INSTALL NO. 1 DIFFERENTIAL SUPPORT PROTECTOR

12. INSTALL NO. 2 DIFFERENTIAL SUPPORT PROTECTOR

13. INSTALL NO. 2 FUEL TANK PROTECTOR

14. ADJUST PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

15. INSTALL FRONT FLOOR NO. 1 HEAT INSULATOR

16. INSTALL FRONT FLOOR COVER CENTER RH

17. INSTALL EXHAUST PIPE ASSEMBLY

18. INSTALL FUEL RETURN VENT TUBE SUB-ASSEMBLY

19. INSTALL REAR FLOOR SERVICE HOLE COVER

20. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

21. INSTALL REAR FLOOR NO. 2 SERVICE HOLE COVER

22. INSTALL ROOM NO. 3 PARTITION PAD

23. INSTALL REAR SEAT CUSHION ASSEMBLY

24. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

25. CHECK FOR FUEL LEAKS

26. PERFORM INITIALIZATION