FRONT LOWER BALL JOINT > INSTALLATION

1. INSTALL FRONT LOWER BALL JOINT

2. INSTALL FRONT SUSPENSION LOWER ARM

3. INSTALL FRONT STABILIZER LINK ASSEMBLY

4. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING

5. CONNECT TIE ROD ASSEMBLY

6. CONNECT SPEED SENSOR FRONT

7. INSTALL HEIGHT CONTROL SENSOR LINK SUB-ASSEMBLY FRONT

8. STABILIZE SUSPENSION

9. FULLY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING

10. FULLY TIGHTEN FRONT SUSPENSION LOWER ARM

11. INSTALL ENGINE UNDER COVER

12. INSTALL FRONT WHEEL

13. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT