YAW RATE SENSOR > INSTALLATION

1. INSTALL YAW RATE SENSOR

2. INSTALL CONSOLE BOX NO.1 DUCT

3. INSTALL CONSOLE BOX NO.2 DUCT

4. INSTALL CONSOLE BOX

5. INSTALL CONSOLE BOX REGISTER ASSEMBLY

6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

8. INSTALL CONSOLE BOX PLATE

9. INSTALL FRONT CONSOLE UPPER PANEL ASSEMBLY

10. INSTALL CONSOLE UPPER PANEL GARNISH FRONT

11. PERFORM YAW RATE SENSOR ZERO POINT CALIBRATION

12. INSPECT VSC SENSOR SIGNAL