DRIVER SIDE KNEE AIRBAG ASSEMBLY > INSTALLATION

1. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY

2. INSTALL INSTRUMENT PANEL SAFETY NO.1 PAD SUB-ASSEMBLY

3. INSTALL INSTRUMENT PANEL UNDER NO.1 COVER SUB-ASSEMBLY

4. INSTALL INSTRUMENT SIDE PANEL

5. INSTALL INSTRUMENT PANEL FINISH PANEL END

6. INSTALL FRONT ASH RECEPTACLE ASSEMBLY

7. INSTALL CONSOLE UPPER PANEL GARNISH FRONT

8. INSTALL FRONT DOOR OPENING TRIM COVER

9. INSTALL FRONT DOOR SCUFF PLATE

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

11. PERFORM INITIALIZATION

12. INSPECT SRS WARNING LIGHT