DRIVER SIDE KNEE AIRBAG ASSEMBLY > REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT DOOR SCUFF PLATE

3. REMOVE FRONT DOOR OPENING TRIM COVER

4. REMOVE CONSOLE UPPER PANEL GARNISH FRONT

5. REMOVE FRONT ASH RECEPTACLE ASSEMBLY

6. REMOVE INSTRUMENT PANEL FINISH PANEL END

7. REMOVE INSTRUMENT SIDE PANEL

8. REMOVE INSTRUMENT PANEL UNDER NO.1 COVER SUB-ASSEMBLY

9. REMOVE INSTRUMENT PANEL SAFETY NO.1 PAD SUB-ASSEMBLY

10. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY