WATER PUMP > INSTALLATION

1. INSTALL WATER PUMP ASSEMBLY

2. INSTALL TENSIONER PULLEY

3. INSTALL NO. 2 IDLER PULLEY SUB-ASSEMBLY

4. INSTALL WATER INLET ASSEMBLY

5. ADD ENGINE COOLANT

6. CHECK FOR ENGINE COOLANT LEAKS

7. INSTALL WATER PUMP PULLEY

8. INSTALL NO. 2 ENGINE COVER

9. INSTALL V-RIBBED BELT

10. INSTALL V-BANK COVER SUB-ASSEMBLY

11. INSTALL NO. 1 AIR CLEANER INLET

12. INSTALL COOL AIR INTAKE DUCT SEAL

13. INSTALL ENGINE UNDER COVER

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

15. PERFORM INITIALIZATION