RADIO ANTENNA CORD > REMOVAL

1. SET RADIO RECEIVER ASSEMBLY TO SHIPMENT MODE

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH

4. REMOVE CONSOLE UPPER PANEL ASSEMBLY

5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

7. REMOVE CONSOLE BOX PLATE

8. REMOVE CONSOLE BOX REGISTER ASSEMBLY

9. REMOVE CONSOLE BOX

10. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY

11. CONFIRM RADIO RECEIVER ASSEMBLY SHIPMENT MODE

12. REMOVE ANTENNA CORD SUB-ASSEMBLY

13. REMOVE REAR SEAT CUSHION ASSEMBLY

14. REMOVE REAR SEAT HEADREST ASSEMBLY LH AND RH

15. REMOVE REAR SEAT HEADREST ASSEMBLY CENTER

16. REMOVE REAR SEATBACK ASSEMBLY

17. REMOVE REAR DOOR SCUFF PLATE RH

18. REMOVE REAR SEAT SIDE GARNISH RH

19. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY