ULTRASONIC SENSOR > REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE COOL AIR INTAKE DUCT SEAL

3. REMOVE ENGINE UNDER COVER

4. REMOVE FRONT FENDER LINER LH

5. REMOVE FRONT FENDER LINER RH

6. REMOVE FRONT BUMPER COVER

7. REMOVE NO. 3 ULTRASONIC SENSOR

8. REMOVE REAR BUMPER NO. 1 PLATE

9. REMOVE REAR BUMPER COVER

10. REMOVE NO. 2 ULTRASONIC SENSOR

11. REMOVE NO. 1 ULTRASONIC SENSOR