3UZ-FE COMPRESSOR AND PULLEY > INSTALLATION

1. ADJUST COMPRESSOR OIL

2. INSTALL COMPRESSOR ASSEMBLY

3. INSTALL OIL FILTER

4. INSTALL DISCHARGE HOSE SUB-ASSEMBLY (w/ Plug Thermostat)

5. INSTALL NO. 1 COOLER REFRIGERANT SUCTION HOSE

6. INSTALL ENGINE UNDER COVER

7. INSTALL V-RIBBED BELT

8. INSTALL V-BANK COVER SUB-ASSEMBLY

9. INSTALL NO. 1 AIR CLEANER INLET

10. INSTALL ENGINE ROOM SIDE COVER LH

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

12. CHARGE REFRIGERANT

13. INSTALL COOL AIR INTAKE DUCT SEAL

14. WARM UP ENGINE

15. CHECK FOR LEAKAGE OF REFRIGERANT

16. PERFORM INITIALIZATION