CONDENSER > INSTALLATION

1. INSTALL COOLER CONDENSER ASSEMBLY

2. INSTALL DISCHARGE HOSE SUB-ASSEMBLY

3. INSTALL LIQUID TUBE SUB-ASSEMBLY A

4. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

5. INSTALL HOOD LOCK ASSEMBLY

6. INSTALL HOOD LOCK CONTROL CABLE COVER

7. INSTALL RADIATOR SUPPORT OPENING COVER

8. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

9. INSTALL FRONT BUMPER COVER

10. INSTALL NO. 1 AIR CLEANER INLET

11. INSTALL ENGINE ROOM SIDE COVER LH

12. INSTALL ENGINE ROOM SIDE COVER RH

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

14. CHARGE REFRIGERANT

15. INSTALL COOL AIR INTAKE DUCT SEAL

16. WARM UP ENGINE

17. CHECK FOR LEAKAGE OF REFRIGERANT

18. PERFORM INITIALIZATION