3GR-FSE COMPRESSOR AND PULLEY > INSTALLATION

1. ADJUST COMPRESSOR OIL

2. INSTALL COMPRESSOR ASSEMBLY

3. INSTALL DISCHARGE HOSE SUB-ASSEMBLY

4. INSTALL NO. 1 COOLER REFRIGERANT SUCTION HOSE

5. INSTALL ENGINE UNDER COVER

6. INSTALL V-RIBBED BELT

7. INSTALL NO. 1 AIR CLEANER INLET

8. INSTALL ENGINE ROOM LH SIDE COVER

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

10. CHARGE REFRIGERANT

11. INSTALL COOL AIR INTAKE DUCT SEAL

12. WARM UP ENGINE

13. CHECK FOR LEAKAGE OF REFRIGERANT

14. PERFORM INITIALIZATION