CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY > REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE COOL AIR INTAKE DUCT SEAL

3. REMOVE ENGINE ROOM SIDE COVER RH

4. REMOVE ENGINE ROOM SIDE COVER LH

5. REMOVE V-BANK COVER

6. REMOVE NO. 1 AIR CLEANER INLET

7. REMOVE INTAKE AIR CONNECTOR PIPE

8. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY RH

9. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY LH