CRANKSHAFT POSITION SENSOR > INSTALLATION

1. INSTALL CRANKSHAFT POSITION SENSOR

2. INSTALL COMPRESSOR ASSEMBLY

3. INSTALL ENGINE UNDER COVER

4. INSTALL V-RIBBED BELT

5. INSTALL V-BANK COVER

6. INSTALL NO. 1 AIR CLEANER INLET

7. INSTALL ENGINE ROOM SIDE COVER LH

8. INSTALL ENGINE ROOM SIDE COVER RH

9. INSTALL COOL AIR INTAKE DUCT SEAL

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

11. PERFORM INITIALIZATION