FRONT SUSPENSION LOWER ARM > INSTALLATION

1. INSTALL LOWER ARM NO.2 BRACKET SUB-ASSEMBLY

2. INSTALL FRONT LOWER BALL JOINT

3. TEMPORARILY TIGHTEN FRONT SUSPENSION LOWER ARM

4. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING

5. CONNECT FRONT STABILIZER LINK ASSEMBLY

6. CONNECT TIE ROD ASSEMBLY

7. CONNECT SPEED SENSOR FRONT

8. CONNECT HEIGHT CONTROL SENSOR LINK SUB-ASSEMBLY FRONT

9. STABILIZE SUSPENSION

10. FULLY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING

11. FULLY TIGHTEN FRONT SUSPENSION LOWER ARM

12. INSTALL ENGINE UNDER COVER

13. INSTALL FRONT WHEEL

14. HEADLIGHT AIMING INSPECTION

15. HEADLIGHT AIMING ADJUSTMENT

16. INSPECT VEHICLE STABILITY CONTROL SYSTEM

17. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT