FRONT ACCELERATION SENSOR > REPLACEMENT

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT DOOR SCUFF PLATE LH

3. REMOVE FRONT DOOR OPENING TRIM COVER LH

4. REMOVE INSTRUMENT SIDE PANEL LH (for RHD)

5. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1 (for LHD)

6. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2 (for RHD)

7. REMOVE INSTRUMENT PANEL AIRBAG ASSEMBLY LOWER NO.2 (for RHD)

8. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

9. REMOVE ACCELERATION SENSOR ASSEMBLY (for LHD)

10. REMOVE ACCELERATION SENSOR ASSEMBLY (for RHD)

11. REMOVE ACCELERATION SENSOR (for LHD)

12. REMOVE ACCELERATION SENSOR (for RHD)

13. INSTALL ACCELERATION SENSOR (for LHD)

14. INSTALL ACCELERATION SENSOR (for RHD)

15. INSTALL ACCELERATION SENSOR ASSEMBLY (for LHD)

16. INSTALL ACCELERATION SENSOR ASSEMBLY (for RHD)

17. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)

18. INSTALL INSTRUMENT PANEL AIRBAG ASSEMBLY LOWER NO.2 (for RHD)

19. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1 (for LHD)

20. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2 (for RHD)

21. INSTALL INSTRUMENT SIDE PANEL LH (for RHD)

22. INSTALL FRONT DOOR OPENING TRIM COVER LH

23. INSTALL FRONT DOOR SCUFF PLATE LH

24. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

25. INSPECT SRS WARNING LIGHT (for RHD)

26. INSPECT ADAPTIVE VARIABLE SUSPENSION SYSTEM

27. PERFORM INITIALIZATION