ROOM TEMPERATURE SENSOR > INSTALLATION

1. INSTALL ROOM TEMPERATURE SENSOR

2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

3. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY

4. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

5. INSTALL INSTRUMENT SIDE PANEL LH

6. INSTALL FRONT DOOR OPENING TRIM COVER LH

7. INSTALL FRONT DOOR SCUFF PLATE LH

8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

9. INSTALL CONSOLE UPPER PANEL ASSEMBLY

10. INSTALL FRONT CONSOLE UPPER PANEL GARNISH

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

12. PERFORM INITIALIZATION