HOOD LOCK CONTROL CABLE ASSEMBLY > REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE ENGINE ROOM SIDE COVER LH

3. REMOVE COOL AIR INTAKE DUCT SEAL

4. REMOVE ENGINE UNDER COVER

5. REMOVE FRONT FENDER LINER LH

6. REMOVE FRONT FENDER LINER RH

7. REMOVE FRONT BUMPER COVER

8. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Cruise Control System)

9. REMOVE HOOD LOCK CONTROL CABLE COVER

10. REMOVE FRONT FENDER PROTECTOR UPPER LH

11. REMOVE HOOD LOCK ASSEMBLY

12. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

13. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY