REAR NO. 2 UPPER CONTROL ARM > INSTALLATION


  1. TEMPORARILY TIGHTEN REAR NO. 2 UPPER CONTROL ARM

  2. TEMPORARILY TIGHTEN REAR SHOCK ABSORBER WITH COIL SPRING

  3. STABILIZE SUSPENSION

  4. FULLY TIGHTEN REAR NO. 2 UPPER CONTROL ARM

  5. FULLY TIGHTEN REAR SHOCK ABSORBER WITH COIL SPRING

  6. INSTALL DIFFERENTIAL NO.2 SUPPORT PROTECTOR

  7. INSTALL REAR WHEEL

  8. INSPECT AND ADJUST REAR WHEEL ALIGNMENT