BRAKE PEDAL STROKE SENSOR > REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE CONSOLE UPPER PANEL GARNISH

3. REMOVE CONSOLE UPPER PANEL SUB-ASSEMBLY

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH (for LHD)

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for RHD)

6. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)

7. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

8. REMOVE FRONT DOOR OPENING TRIM COVER LH (for LHD)

9. REMOVE FRONT DOOR OPENING TRIM COVER RH (for RHD)

10. REMOVE INSTRUMENT SIDE PANEL LH (for LHD)

11. REMOVE INSTRUMENT SIDE PANEL RH (for RHD)

12. REMOVE INSTRUMENT PANEL NO.1 UNDER COVER SUB-ASSEMBLY

13. REMOVE INSTRUMENT PANEL NO.1 SAFETY PAD SUB-ASSEMBLY

14. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

15. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY